Featured products

Air Compressor

Air Compressor

An Ultra Quiet 1HP 4.6 Gallon Twin Steel Tank compressor. 72 decibel operation. 3000 hr lifecycle compared to 500 hr lifecycle typical of consumer grade compressors.Features an integrated regulator and two integrated pressure gauges to monitor bo..

$270

Upgrade Kit, Mini Mill

Upgrade Kit, Mini Mill

Do not buy this kit if you have a HiTorque Mini Mill. Most or all of these features are already included on the HiTorque mills.This kit provides an easy-to-install alternative to the noisy and fragile factory-installed gears that drive the spindl..

$201

Change Gear Set, Metal

Change Gear Set, Metal

Complete set of steel change gears for the mini lathe. Includes the following:1 30 Tooth gear1 35 Tooth gear2 40 Tooth gear1 45 Tooth gear1 50 Tooth gear1 55 Tooth gear1 57 Tooth gear1 60 Tooth gear1 65 Tooth gear..

$92

Bellows, Chip Guard

Bellows, Chip Guard

Chip guard bellows.This piece of bellows is good for either the front or rear chip guard bellows on the mill. Get 2 pieces if you need to replace both. There are 10 "V"s in this bellows.The bellows is approximately 6" long and 7.8" wide when laid..

$7

Dividing Plate Set for 4" Rotary Table

Dividing Plate Set for 4" Rotary Table

This dividing plate fits the Phase II 4" Rotary Table (PN 1727) and the 4" H/V rotary table (PN 1927).It consists of one plate with a set of 10 holes. This lets you divide a circle into 1/2 degree increments.Because this is 1/720 of a circle, you..

$81

Automatic Tool Changer, PCNC 1100

Automatic Tool Changer, PCNC 1100

The Tormach Tooling System ATC is a 10 tool carousel-style automatic TTS tool changer for the PCNC 1100 Mill. The side mounted changer integrates with our existing power draw bar system to automatically change tools via controller command.The des..

$4,400

Milling Machine CNC with Enclosure

Milling Machine CNC with Enclosure

The LittleMachineShop.com model 3502 CNC Milling Machine is a complete CNC solution that incorporates our time-tested model 3501 in a sturdy enclosure. It's not a conversion or adaptation; this machine is designed and built by the factory as a CN..

$4,400

Lathe CNC, Tormach 15L Slant Pro

Lathe CNC, Tormach 15L Slant Pro

The Tormach 15L Slant-PRO™ is a compact CNC slant-bed lathe designed for prototyping and light production work. With highly customizable workholding, rigid tapping support, and a host of configurable options and upgrades, the Tormach 15L Slant-PR..

$12,500