• Upgrade Kit, Mini Mill

Do not buy this kit if you have a HiTorque Mini Mill. Most or all of these features are already included on the HiTorque mills.

This kit provides an easy-to-install alternative to the noisy and fragile factory-installed gears that drive the spindle on the mini mill. The kit includes one belt. Change speeds without any tools. Simply remove the guard, loosen the lever locks and move the belt from one pair of pulleys to the other. Low speed range is 0-1700 RPM. High speed range is 0-4300 RPM. This belt drive fits the following mills:

Grizzly G0516 Lathe Mill Combo

Cummins 7877 Mini Mil

Grizzly G8689 Mini Milling Machine

Harbor Freight 44991 Central Machinery Mini Mill/Drill

Hare & Forbes HM-10 Mini Mill Drill

Homier 03947 Speedway Mini Mill

Micro-Mark 82573 MicroLux Milling Machine

The small pulley has a 9 mm bore with a 3 mm keyway. The large pulley has a 30 mm bore with a 5 mm keyway. If your shafts don't match these values, then this belt drive will not fit your mill.

Convert torsion spring mini mills to air spring. This kit provides all the parts required to change to a vertical air spring that mounts inside and above the column. With the air spring installed, you can move the mill head up until the top of the casting is almost flush with the top of the column. You can move it down until it almost contacts the adjustable Z-axis stop set in its lowest position. This air spring has about 35 pounds of force. This is not enough to totally support the head, but it is a heck of a lot more support than the torsion arm provides.

Write a review

Note: HTML is not translated!
    Bad           Good

Upgrade Kit, Mini Mill

  • Product Code: Upgrade Kit, Mini Mill
  • Availability: In Stock
  • $201